900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Toshiba Electronic Components Datasheet

TC78B015BFTG Datasheet

3-phase Driver

No Preview Available !

TC78B015BFTG
TOSHIBA CMOS Integrated Circuit Silicon Monolithic
TC78B015BFTG
3-phase Driver for Brushless DC Motors
The TC78B015BFTG is for three-phase full-wave brushless DC
motor with 150-degree trapezoid PWM chopper system. They
control motor rotational speed by changing the PWM duty, based
on the speed control input. Hall signal is supported three sensors
for the TC78B015BFTG.
Features
P-WQFN36-0505-0.50-001
Weight: 0.06 g (typ.)
Three-phase full wave drive
150-degree trapezoid PWM chopper system
Soft switching
Hall amplifier (hall element / hall IC):
3-sensor drive
Power supply: absolute maximum voltage: 25 V
Output current: absolute maximum current: 3 A
Selectable rotational speed command input signal:
Pulse duty signal input/analog voltage input/PWM signal input
Selectable PWM frequency
Adjustable minimum duty in PWM control
Adjustable speed ratio in PWM control
Selectable lead angle control function: Auto lead angle function/External lead angle control (32 steps correspond
to 0 to 58°)
Selectable rotation direction
Brake function terminal
Selectable lock detection function
Restart function
Rotation frequency signal (FG_OUT):
1 pulse/electrical angle 360°, 3 pulse/ electrical angle 360°
Lock detection signal (LD_OUT)
Power supply voltage monitoring function
Overcurrent detection circuit (ISD)
Thermal shutdown circuit (TSD)
Under voltage lockout circuit (UVLO)
Current limit circuit
Adjustable start conditions
1
© 2016 TOSHIBA Corporation
2016-12-26


Toshiba Electronic Components Datasheet

TC78B015BFTG Datasheet

3-phase Driver

No Preview Available !

Pin assignment
<Top view>
TC78B015BFTG
27 26 25 24 23 22 21 20 19
LD_OUT 28
TEST 29
SEL_LA 30
MIN_SP 31
SEL_SP 32
FPWM 33
SEL_LD 34
BRAKE 35
CW/CCW 36
E-PAD
18 HWP
17 HWM
16 MVM
15 VM
14 VM
13 PGND3
12 LA
11 TSP/VSP
10 SEL_FG
1 2 34 5 67 8 9
Note 1: Design the pattern in consideration of the heat design because the back side (E-PAD) has the role of heat
radiation. The back side (E-PAD) should be connected to GND because it is connected to the back of the chip
electrically.
Note 2: There are four pairs of terminals named U, V, W, and VM. Connect two each of the terminals which has the
same pin symbol via external patterns. Regarding GND, connect PGND1, PGND2, PGND3, and SGND via
external patterns. PGND1 and PGND2 are short-circuited in the IC.
2
2016-12-26


Part Number TC78B015BFTG
Description 3-phase Driver
Maker Toshiba
PDF Download

TC78B015BFTG Datasheet PDF






Similar Datasheet

1 TC78B015BFTG 3-phase Driver
Toshiba





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy