CD Integrated Circuit Silicon Monolithic
DUAL-BRIDGE DRIVER IC FOR DC MOTORS
The TC78H600FNG/FTG is a dual-bridge driver IC for DC motors which incorporates DMOS in output transistors.
DMOS output driver with low ON-resistance and PWM drive system are applied to realize high efficiency driving.
• Power supply voltage for motor: VM=15V (max)
• Power supply voltage for control: Vcc=2.7V to 5.5V
• Output current: Iout ≤ 0.8A (max)
• Output ON resistance: Ron=1.2Ω (upper and lower sum)
• Internal pull-down resistors on inputs: 200 kΩ (typ.)
• Built-in over current detection (ISD), thermal shutdown
(TSD) circuit, and under voltage lockout (UVLO) circuit.
• ALERT output pin
• Package: TC78H600FNG;SSOP20, TC78H600FTG; QFN24
• Built-in cross conduction protection circuit
* This product has a MOS structure and is sensitive to
Weight: SSOP20-P-225-0.65A: 0.09g(typ.)
electrostatic discharge. When handling this product,
ensure that the environment is protected against
electrostatic discharge by using an earth strap, a
conductive mat and an ionizer. Ensure also that the ambient temperature and relative humidity are
maintained at reasonable levels.
*The IC should be installed correctly. Otherwise, the IC or peripheral parts and devices may be degraded or