Photocouplers GaAℓAs Infrared LED & Photo IC
TLP2710
TLP2710
1. Applications
• Programmable Logic Controllers (PLCs)
• Battery Management System (BMS)
• Industrial Inverters
2. General
The TLP2710 is a 5-Mbps low-power photocoupler in the small SO6L package. It is housed in a thin SO6L package
of 2.3 mm (max). The TLP2710 has guaranteed the isolation voltage 5 kVrms and compliant with international
safety standards for reinforced insulation. The TLP2710 consumes supply current (IDDL/IDDH) of only 0.3 mA
maximum over the entire operating temperature range of -40 to 125 and operates at a supply voltage as low
as 2.7 V, contributing to a reduction in power consumption of various systems. The input forward current can be
less than 1 mA maximum, allowing direct drive by a microcontroller. The detector has a totem-pole output stage
with current sourcing and sinking capabilities. The TLP2710 has an internal Faraday shield that provides a
guaranteed common-mode transient immunity of ±25 kV/µs.
3. Features
(1) Package: SO6L
(2) Data transfer rate: 5 MBd (typ.) (NRZ)
(3) Supply current: 0.3 mA (max)
(4) Threshold input current: 1.0 mA (max)
(5) Supply voltage: 2.7 V to 5.5 V
(6) Operating temperature: -40 to 125
(7) Propagation delay time: 250 ns (max)
(8) Pulse width distortion: 30 ns (max)
(9) Isolation voltage: 5000 Vrms (min)
(10) Safety standards
UL-approved: UL1577, File No.E67349
cUL-approved: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN60747-5-5, EN60065, EN60950-1, EN 62368-1 (Note 1)
Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2015-2018
Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2015-05
2018-03-09
Rev.6.0