Datasheet4U Logo Datasheet4U.com

TLP2719 - Photocoupler

Key Features

  • (1) Inverter logic type (open collector output) (2) Package: SO6L (3) Operating temperature: -40 to 100.
  • (4) Supply voltage: -0.5 to 30 V (5) Data transfer rate: 1 MBd (typ. ) (NRZ) (6) Common-mode transient immunity: ±10 kV/µs (min) (7) Isolation voltage: 5000 Vrms (min) (8) Safety standards UL-recognized: UL 1577, File No. E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No. E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photocouplers Infrared LED & Photo IC TLP2719 TLP2719 1. Applications • Intelligent Power Module Signal Isolation • Factory Automation (FA) • Industrial Inverters 2. General The TLP2719 consists of a high-output infrared LED coupled with a high-gain, high-speed photo detector. It is housed in the SO6L package. This product can be mounted on the same land-pattern as Toshiba's SDIP6 packages. In addition, the SO6L packages has a maximum height of 2.3 mm, which is approximately 45 % thinner than the conventional SDIP6 packages. Its low profile package contributes to system size reduction and can be placed in height-restricted locations, such as the back of a board.