Datasheet4U Logo Datasheet4U.com

TLP2710 - Photocoupler

Key Features

  • (1) Package: SO6L (2) Data transfer rate: 5 MBd (typ. ) (NRZ) (3) Supply current: 0.3 mA (max) (4) Threshold input current: 1.0 mA (max) (5) Supply voltage: 2.7 V to 5.5 V (6) Operating temperature: -40 to 125  (7) Propagation delay time: 250 ns (max) (8) Pulse width distortion: 30 ns (max) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards UL-approved: UL1577, File No. E67349 cUL-approved: CSA Component Acceptance Service No.5A File No. E67349 VDE-approved: EN60747-5-5, EN60065, EN60950.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLP270G TRIPOLAR OVERVOLTAGE PROTECTION for TELECOM LINE STMicroelectronics
TLP270G-1 TRIPOLAR OVERVOLTAGE PROTECTION for TELECOM LINE STMicroelectronics
TLP270M TRIPOLAR OVERVOLTAGE PROTECTION for TELECOM LINE STMicroelectronics
TLP200D Photocoupler Toshiba Semiconductor
TLP200G TRIPOLAR OVERVOLTAGE PROTECTION STMicroelectronics

Other Datasheets by Toshiba

Part Number Description
TLP2719 Photocoupler
TLP2701 Photocoupler
TLP2703 Photocouplers
TLP2704 Photocoupler
TLP270D GaAs Ired & Photo-MOS FET / Photo-Transistor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photocouplers GaAℓAs Infrared LED & Photo IC TLP2710 TLP2710 1. Applications • Programmable Logic Controllers (PLCs) • Battery Management System (BMS) • Industrial Inverters 2. General The TLP2710 is a 5-Mbps low-power photocoupler in the small SO6L package. It is housed in a thin SO6L package of 2.3 mm (max). The TLP2710 has guaranteed the isolation voltage 5 kVrms and compliant with international safety standards for reinforced insulation. The TLP2710 consumes supply current (IDDL/IDDH) of only 0.3 mA maximum over the entire operating temperature range of -40 to 125  and operates at a supply voltage as low as 2.7 V, contributing to a reduction in power consumption of various systems. The input forward current can be less than 1 mA maximum, allowing direct drive by a microcontroller.