TLP358H
TLP358H is Photocouplers manufactured by Toshiba.
Features
(1) Buffer logic type (totem pole output) (2) Output peak current: ±6.0 A (max) (3) Operating temperature: -40 to 125 (4) Supply current: 2 m A (max) (5) Supply voltage: 15 to 30 V (6) Threshold input current: 5 m A (max) (7) Propagation delay time: 500 ns (max) (8) mon-mode transient immunity: ±20 k V/µs (min) (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards
UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5 (Note 1) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4).
©2016 Toshiba Corporation
Start of mercial production
2009-06
2016-04-18 Rev.6.0
4. Packaging (Note)
TLP358H(LF1,TP1)
TLP358H,TLP358HF
TLP358H(LF5,TP5)
11-10C4S
TLP358HF
11-10C401S
TLP358HF(LF4,TP4)
11-10C405S
11-10C402S
11-10C404S
Note: Through-hole type: TLP358H, TLP358HF Lead forming option: (LF1), (LF4), (LF5) Taping option: (TP1), (TP4), (TP5)
5. Pin Assignment
1: N.C. 2: Anode 3: Cathode 4: N.C. 5: GND 6: N.C. 7: VO (Output) 8: VCC
©2016 Toshiba Corporation
2016-04-18 Rev.6.0
6. Internal Circuit (Note)
TLP358H,TLP358HF
Note: A 1.0-µF bypass capacitor must be connected between pin 8 and pin 5.
7. Principle of Operation 7.1. Truth Table
Input H L
LED ON OFF
M1 ON OFF
M2 OFF ON
Output H L
7.2. Mechanical Parameters
Characteristics
Creepage distances Clearance distances Internal isolation thickness
7.62 mm Pitch TLP358H 7.0 (min) 7.0 (min) 0.4 (min)
10.16 mm Pitch...
