TLP700A
TLP700A is Photocoupler manufactured by Toshiba.
Photocouplers Infrared LED & Photo IC
1. Applications
- Industrial Inverters
- Air Conditioner Inverters
- MOSFET Gate Drivers
- IGBT Gate Drivers
- Induction Cooktop and Home Appliances
2. General
The TLP700A is a photocoupler in a 6-pin SDIP package that consists of an infrared LED optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performance and specifications at temperatures up to 110 . The TLP700A is physically smaller than the one in an 8-pin DIP package and pliant with international safety standards for reinforced insulation. It thus provides a smaller footprint solution for applications that require safety standard certification. An internal noise shield provides a guaranteed monmode transient immunity of ±20 k V/µs. It is ideal for IGBT and power MOSFET gate drive.
3. Features
(1) Buffer logic type (totem pole output) (2) Output peak current: ±2.5 A (max) (3) Operating temperature: -40 to 110 (4) Supply current: 3 m A (max) (5) Supply voltage: 15 to 30 V (6) Threshold input current: 5 m A (max) (7) Propagation delay time: 200 ns (max) (8) mon-mode transient immunity: ±20 k V/µs (min) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards
UL-recognized: UL 1577, File No.E67349 c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2015-2020 Toshiba Electronic Devices & Storage Corporation
Start of mercial production
2012-01
2020-02-05 Rev.5.0
4. Packaging and Pin Configuration
11-5J1S
5. Internal Circuit (Note)
1: Anode 2: N.C. 3: Cathode 4: GND 5: VO (Output) 6: VCC
Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4.
6. Principle of Operation 6.1. Truth Table
Input H L
LED ON OFF
M1 ON OFF
M2 OFF ON
Output H L
6.2. Mechanical Parameters
Chara...
