Datasheet4U Logo Datasheet4U.com

TA6038FN - SHOCK SENSOR

Features

  • TA6038FN operates from 2.7 to 5.5 V DC single power supply voltage. Signal from the shock sensor is amplified according to setting gain, and is detected through the internal window comparator. TA6038FN incorporates 1-ch shock detecting circuitry. Input terminal of sensor signal is designed high impedance. Differential input impedance = 100 MΩ (typ. ).
  • LPF (low pass filter) circuitry is incorporated. Cut-off frequency of LPF = 7 kHz Sensitivity of shock detection can b.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TA605 Power Chip Resistor ETC
TA613A Indoor Tap/Splitter Dibo
TA616A Indoor Tap/Splitter Dibo
TA619A Indoor Tap and Splitter Dibo
TA6215xxxx TCXO Oscillator Caliber Electronics

Other Datasheets by Toshiba

Part Number Description
TA6039FN Shock Sensor
TA6009FM Shock Sensor
TA6009FN SHOCK SENSOR
TA6009FNG SHOCK SENSOR
TA6042FNG Shock sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com TA6038FN TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA6038FN Shock Sensor IC TA6038FN detects an existence of external shock through the shock sensor and output. Features · · TA6038FN operates from 2.7 to 5.5 V DC single power supply voltage. Signal from the shock sensor is amplified according to setting gain, and is detected through the internal window comparator. TA6038FN incorporates 1-ch shock detecting circuitry. Input terminal of sensor signal is designed high impedance. Differential input impedance = 100 MΩ (typ.) · · · LPF (low pass filter) circuitry is incorporated. Cut-off frequency of LPF = 7 kHz Sensitivity of shock detection can be adjusted by external devices. Small package SSOP10-P-0.65A (0.65 mm pitch) Weight: 0.04 g (typ.
Published: |