MD-169
MD-169 is Termination Insensitive Mixer manufactured by Tyco Electronics.
- Part of the MD-169PIN comparator family.
- Part of the MD-169PIN comparator family.
..
Termination Insensitive Mixer, 1 MHz
- 3.5 GHz
Features
- Intermodulation Ratio is Insensitive to Port Mismatches
- VSWR: <2.0:1 Typical Midband
- Isolation: 35 dB Typical Midband
- Impedance: 50 Ohms Nominal
- Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C
- LO Power: +24 dBm Max.
- MIL-STD-883 Screening Available
MD-/MDC-/MDS-169 V5
FP-2 (MD-169)
Description
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match...
