MD-169 Datasheet | MACOM Technology Solutions

Features - Intermodulation Ratio is Insensitive to Port Mismatches - VSWR: <2.0:1 Midband - Isolation: 35 d B Midband - Impedance: 50 Ω Nominal - Input Power: 350 m W Max. @ 25°C, Derated to 85°C @ 3.2 m W/°C - LO Power: 24 d Bm Max. - MIL-STD-883 Screening Available Applications - Aerospace & Defense - ISM Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. bined, these features give the mixer its insensitivity to external mismatches, plus superior VSWR. C-7 (MDC-169) SF-1 (MDS-169)1 FP-2 (MD-169)1 Ordering Information Part Number MDC-169-SMA MDS-169-PIN MD-169-PIN Package C-7 SF-1 FP-2 MDx-169 Rev. V8 1. All pins not marked are ground pins. MA Technology Solutions Inc. (MA) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. For further information and support please visit: https://.ma./support DC-0003916 Termination Insensitive Mixer 1 MHz - 3.5 GHz MDx-169 Rev. V8 Electrical Specifications2: Freq. RF & LO Ports = 0.001 - 3.5 GHz, IF Port = 5 - 1500 MHz, TA = -55°C to +85°C Parameter Test Conditions Units Min. Typ. Max. Conversion Loss3 Isolation...