Datasheet4U Logo Datasheet4U.com

MD-169 - Termination Insensitive Mixer

Download the MD-169 datasheet PDF. This datasheet also covers the MD-169PIN variant, as both devices belong to the same termination insensitive mixer family and are provided as variant models within a single manufacturer datasheet.

General Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Key Features

  • Intermodulation Ratio is Insensitive to Port Mismatches.
  • VSWR:.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MD-169PIN_TycoElectronics.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MD-169 Termination Insensitive Mixer MACOM
MD-160 Termination Insensitive Mixer MA-COM
MD-161 Termination Insensitive Mixer MA-COM
MD-108 Double-Balanced Mixer MA-COM
MD-123 Double-Balanced Mixer MA-COM

Other Datasheets by Tyco Electronics (now TE Connectivity)

Part Number Description
MD-113 High Performance Double-Balanced Mixer
MD-124 Double-Balanced Mixer
MD-156 Flatpack Double-Balanced Mixer
MD-158 Double-Balanced Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Termination Insensitive Mixer, 1 MHz - 3.5 GHz Features • Intermodulation Ratio is Insensitive to Port Mismatches • VSWR: <2.0:1 Typical Midband • Isolation: 35 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C • LO Power: +24 dBm Max. • MIL-STD-883 Screening Available MD-/MDC-/MDS-169 V5 FP-2 (MD-169) Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.