TP Series
Pushbutton Switches, Tiny, Part Number Matrix
MATERIAL SPECIFICATIONS:
Contacts ......................................Gold - gold plate, silver - silver plate
Case Material..............................High temperature polyester
Actuator Material........................Polyamide
Terminals/Fixed Contacts ..........Tin lead plate
Terminal Seal..............................SP epoxy, DP epoxy optional
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature ..............-22°F to +149°F (-30°C to +65°C)
Storage Temperature ..................-22°F to +149°F (-30°C to +65°C)
Solder Heat Resistance ..............See page M3-4
TYPICAL PERFORMANCE CHARACTERISTICS:
Contact Rating ............................Gold: 0.4 VA Max. @ 20 VDC or peak AC
Silver: 1A @ 125 VAC or 28 VDC resistive
Initial Contact Resistance ..........20 Milliohms max.
Contact Timing ..........................Break-before-make
Insulation Resistance ..................1,000 Megohms @ 500VDC min.
Dielectric Strength......................1,000 Volts @ sea level
Actuation Force ..........................50 to 400 Grams
Plunger/Actuator Travel .............030" (.762)
Life Expectancy..........................See below
Note: Hardware included with switches
D PART NUMBERING MATRIX
Model
TP
Bushing Actuator
Poles
Rating
Function
Process
Plating Terminations Seal
Button
Colors
Blank= Sq. No Bushing
A=Rnd. No Bushing
B=Rnd., .188" Bushing Dia.
Unthreaded
C=Rnd., 10/48 Bushing Dia.
D=Rnd., .250" Bushing Dia.
Unthreaded
F=Rnd., 1/4-40 Bushing Dia.
F = Flush Actuator*
1 = Single
2 = Double
1 = Gold
0.4 VA
3 = Silver**
1 Amp
SP DP
C M S.T. Momentary
F R D.T. Momentary
G = Gold
None = Silver**
ES = Process Sealed***
Process Seal:
Blank=Wire lug
PC=Printed Circuit
RA=Right Angle***
Disposable boot,
epoxied double 0=Black
case 2=Red
VRA=Vertical Right Angle****
* Available with “B” and "C" bushing only
** Silver - available only in wire lug and PC termination
*** Right angle, ES available with “B” and "C" bushing only
**** Available only in single pole
ES switches provided with disposable boot
used only during cleaning operation.
Application Note:
For 3 pole and 4 pole, refer to pages D22 and D24 . . . “MP Series”
For Surface Mount termination, refer to pages D3-D5 . . . “TSP Series”
TP Series Life Expectancy Chart
Pushbuttons
0.4 (Gold Plate)
1A (Silver Plate)
1 Pole 2 Pole
100,000 80,000
60,000 50,000
PROCESS SEAL
VERSION NOT
PROCESS SEAL
VERSION AVAILABLE
SERIES (TP)
TP TPA TPB TPC TPD TPF
D6
Catalog 1308390
Issued 9-04
www.tycoelectronics.com
Dimensions are in inches
Dimensions are shown for
and millimeters unless otherwise reference purposes only.
specified. Values in parentheses Specifications subject
or brackets are metric equivalents. to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Free Datasheet http://www.datasheet4u.com/
