Datasheet4U Logo Datasheet4U.com

MD-179 - Termination Insensitive Mixer

Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Features

  • n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR:.

📥 Download Datasheet

📁 Similar Datasheet

  • MD-179 - Termination Insensitive Mixer (MACOM)
  • MD-108 - Double-Balanced Mixer (MA-COM)
  • MD-113 - High Performance Double-Balanced Mixer (Tyco)
  • MD-123 - Double-Balanced Mixer (MA-COM)
  • MD-124 - Double-Balanced Mixer (Tyco)
  • MD-124 - Double-Balanced Mixer (MA-COM)
  • MD-140 - Double-Balanced Mixer (MA-COM)
  • MD-148 - Double-Balanced Mixer (MA-COM)
  • MD-149 - Double-Balanced Mixer (MA-COM)
  • MD-156 - Flatpack Double-Balanced Mixer (Tyco)
Other Datasheets by Tyco Electronics

    Full PDF Text Transcription

    Click to expand full text
    www.DataSheet4U.com Termination Insensitive Mixer, 1 - 4000 MHz Features n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: <2.0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n V 3.00 MD-/MDC-179 FP-2 (MD-179) to 85°C @ 3.2 mW/°C LO Power: +24 dBm Max. MIL-STD-883 Screening Available Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.
    Published: |