Datasheet4U Logo Datasheet4U.com

MDC-163 - Termination-Insensitive Biasable Mixer

Description

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with minimum distortion.

Features

  • LO Drive: 0 dBm.
  • Intermodulation Ratio Insensitive to IF Ports Mismatches.
  • Conversion Loss: 7 dB Typical Midband.
  • Impedance: 50 Ohms Nominal.
  • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C.
  • Low Power: +24 dBm Max.
  • DC Bias: +5, -5 VDC @12 mA each.
  • MIL-STD-883 Screening Available MDC-163 V3 C-2.

📥 Download Datasheet

📁 Similar Datasheet

  • MDC-169 - Termination Insensitive Mixer (MACOM)
  • MDC-169SMA - Termination Insensitive Mixer (Tyco)
  • MDC-158 - Termination Insensitive Mixer (MA-COM)
  • MDC-179 - Termination Insensitive Mixer (MACOM)
  • MDC-21 - Switch and Shield (PDI)
  • MDC03 - Common Emitter Transistor Array - 3 each PNP and NPN (ROHM)
  • MDC0531E - Common-Drain N-Channel Trench MOSFET (MagnaChip)
  • MDC100 - Diode Modules (PST)
  • MDC100 - Diode Modules (LGE)
  • MDC1000 - Diode Modules (TECHSEM)
Other Datasheets by Tyco Electronics
  • MDC-162 - Termination-Insensitive Mixer
  • MDC-164 - Termination-Insensitive Mixer
  • MDC-179 - Termination Insensitive Mixer

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Termination-Insensitive Biasable Mixer, 1 - 6 GHz Features • LO Drive: 0 dBm • Intermodulation Ratio Insensitive to IF Ports Mismatches • Conversion Loss: 7 dB Typical Midband • Impedance: 50 Ohms Nominal • Maximum Input Power: 500 mW max. @ 25°C, Derated 6.4 mW/°C • Low Power: +24 dBm Max. • DC Bias: +5, -5 VDC @12 mA each • MIL-STD-883 Screening Available MDC-163 V3 C-2 Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms.
Published: |