ULV602 Datasheet | Unisonic Technologies

DESCRIPTION The UTC ULV602 family of low-power operational amplifier (op amps) is offered in dual configurations. The op amps utilize an advanced CMOS technology that provides low bias current, high-speed operation, high open-loop gain, and rail-to-rail output swing. This product offering operates with a single supply voltage that can be as low as 2.7V, while drawing 200µA (typical) of quiescent current per amplifier. In addition, the mon mode input voltage range goes 0.3V below ground, making these amplifiers ideal for single-supply operation. The device is appropriate for low power, battery operated circuits due to the low quiescent current, for A/D convert driver amplifiers because of their wide bandwidth or for anti-aliasing filters by virtue of their low input bias current. - FEATURES - Supply Voltage: 2.7V ~ 6.0V - Supply Current: 200µA/amplifier (Typical) - Input Offset Voltage: 2m V (Max.) - Rail-to-Rail Output - Slew Rate: 2.3V/µs (Typ.) - ORDERING INFORMATION Ordering Number Lead Free Halogen Free ULV602L-S08-R ULV602G-S08-R Package SOP-8 CMOS IC SOP-8 Packing Tape Reel - MARKING .unisonic..tw Copyright © 2024 Unisonic Technologies Co., Ltd 1 of 6 QW-R105-125.A - PIN CONFIGURATION CMOS IC - PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 7 8 PIN NAME OUT 1 -IN 1 +IN 1 V+IN 2 -IN 2 OUT 2 V+ Output of 1 AMP Inverting input of 1 AMP Non-inverting input of 1 AMP Negative Power Supply Non-inverting input of 2 AMP Non-inverting input of 2 AMP Output of 2 AMP Positive Power Supply - BLOCK DIAGRAM DESCRIPTION OUT 1 1 -IN 1 2 +IN 1 3 V- 4 - + + 8 V+ 7 OUT B 6 -IN 2 5 +IN 2 UNISONIC TECHNOLOGIES CO., LTD .unisonic..tw 2 of 6 QW-R105-125.A CMOS IC - ABSOLUTE MAXIMUM RATING (TA=25C, unless otherwise...