Datasheet4U Logo Datasheet4U.com

UT912E - ENCODER

Description

The UTC UT912E of CMOS LSIs for remote control system applications is capable of encoding information which consists of N address bits and 12-N data bits.

Each address/data input can be set to one of the two logic states.

Features

  • S.
  • Operating voltage: 2.4V ~ 12V.
  • Low power and high noise immunity CMOS technology.
  • Low standby current (0.1μA (typ. ) at VDD=5V).
  • Minimum transmission word (Four words).
  • Built-in oscillator needs only 5% resistor.
  • Data code has positive polarity.
  • Minimal external components.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UT9971P 5.0A 60V N-CHANNEL MOSFET UNISONIC TECHNOLOGIES
UT9Q512E 512K x 8 RadTol SRAM Aeroflex Circuit Technology
UT9Q512K32 16Megabit SRAM MCM AEROFLEX
UT9Q512K32 16Megabit SRAM MCM Aeroflex Circuit Technology
UT9Q512K32E 16 Megabit RadTolerant SRAM MCM Aeroflex Circuit Technology

Other Datasheets by Unisonic Technologies

Part Number Description
UT912D DECODERS
UT90N03 N-CHANNEL POWER MOSFET
UT90N06 N-CHANNEL POWER MOSFET
UT9435 P-Channel MOSFET
UT9435H P-CHANNEL MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UT912E ENCODER FOR REMOTE CONTROLLER CMOS IC  DESCRIPTION The UTC UT912E of CMOS LSIs for remote control system applications is capable of encoding information which consists of N address bits and 12-N data bits. Each address/data input can be set to one of the two logic states. The programmed addresses/data are transmitted together with the header bits by a RF or an infrared transmission medium upon receipt of a trigger signal.  FEATURES * Operating voltage: 2.4V ~ 12V * Low power and high noise immunity CMOS technology * Low standby current (0.1μA (typ.
Published: |