Datasheet4U Logo Datasheet4U.com

L3060 - 30V/500mA HIGH DIMMING RATIO LED CONSTANT CURRENT DRIVER

Description

The UTC L3060 is a continuous conduction mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the total LEDs chain voltage.

Features

  • S.
  • 5V~30V input voltage range.
  • Simple low parts count.
  • Typical ±3% output current accuracy.
  • Up to 500mA output current.
  • Single DIM pin on/off and brightness control using DC voltage or PWM signal.
  • High efficiency up to 97%.
  • Adjustable constant LED current.
  • Protection features: LED open-circuit protection LED short-circuit protection Internal thermal shutdown protection.

📥 Download Datasheet

Datasheet preview – L3060

Datasheet Details

Part number L3060
Manufacturer Unisonic Technologies Co., Ltd
File Size 243.87 KB
Description 30V/500mA HIGH DIMMING RATIO LED CONSTANT CURRENT DRIVER
Datasheet download datasheet L3060 Datasheet
Additional preview pages of the L3060 datasheet.

📁 Similar Datasheet

  • L3000 - SUBSCRIBER LINE INTERFACE KIT (STMicroelectronics)
  • L3000N - SLIC KIT OPTIMIZED (STMicroelectronics)
  • L3000S - SUBSCRIBER LINE INTERFACE KIT (STMicroelectronics)
  • L3010 - 1A HIGH POWER LED DRIVER (UTC)
  • L3030 - SUBSCRIBER LINE INTERFACE KIT (STMicroelectronics)
  • L3037 - SUBSCRIBER LINE INTERFACE CIRCUIT (STMicroelectronics)
  • L3080 - 30V/800mA INTEGRATED POWER LED DRIVER (UTC)
  • L3092 - SLIC KIT OPTIMIZED (STMicroelectronics)
  • L30ESDL5V0C6-4 - ESD PROTECTION DIODE (LITE-ON)
Other Datasheets by Unisonic Technologies
  • L3012 - 1A HIGH POWER LED DRIVER

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD L3060 30V/500mA HIGH DIMMING RATIO LED CONSTANT CURRENT DRIVER  DESCRIPTION The UTC L3060 is a continuous conduction mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the total LEDs chain voltage. The device provides an externally adjustable output current of up to 500mA for a single LED. A dedicated DIM pin accepts either a DC voltage (0.5V~2.5V) dimming or a wide range of pulsed dimming. Applying a voltage of 0.3V or lower to the DIM pin turns the output off and switches the device into a low current standby state. The UTC L3060 has a build-in power switch, based on different input voltage, UTC L3060 can drive several 1W or 2W LEDs.
Published: |