TVS4S009 Datasheet | Unisonic Technologies

DESCRIPTION The UTC TVS4S009 has four clamp circuits for dual differential lines, which is an electrostatic discharge solution for high-speed differential lines. The excellent matching between the differential pair signal lines enables this device to operate at high-speed differential data rates (3d B bandwidth>4GHz). The UTC TVS4S009 is suitable for high-speed differential applications, such as high-definition multimedia interface (HDMI), low-voltage differential signaling (LVDS), serial advanced technology attachment (SATA), Ethernet, etc. It also plies with IEC 61000-4-2 (Level 4) ESD. The UTC TVS4S009 can operate over the ambient air temperature range of -40°C~85°C. 65 4 1 23 SOT-26 - FEATURES - Supports high-speed differential data rates (3d B bandwidth>4 GHz) - 0.05p F matching capacitance between differential signal pairs - Flow-through single-in-line pin mapping for high-speed lines ensures no additional board layout burden while placing ESD protection chip near connector - Low 0.8p F line capacitance for each data line to GND - 2.5A peak pulse current (8/20µs pulse) - IEC 61000-4-2 (Level 4) system-level ESD pliance - Industrial temperature range: -40°C~85°C - ORDERING INFORMATION Ordering Number TVS4S009G-AG6-R Package SOT-26 Packing Tape Reel .unisonic..tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 4 QW-R215-009.b - MARKING Preliminary - PIN CONFIGURATION - PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 PIN NAME D1+ GND D2+ D2VCC D1- DESCRIPTION High-speed ESD clamp provides ESD protection to the high-speed differential data lines Ground High-speed ESD clamp provides ESD protection to the high-speed differential data lines High-speed ESD clamp provides ESD protection to the high-speed differential data lines Supply High-speed ESD clamp provides ESD protection to the high-speed differential data lines - BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD .unisonic..tw 2 of 4 QW-R215-009.b Preliminary - ABSOLUTE...