CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, Very High Isolation Voltage
CNY64ST
Top View
AC
CNY65ST
CE
DVE
17187-6
17187-5
DESCRIPTION
The CNY6XST, the high isolation voltage SMD version
optocouplers consist of a phototransistor optically coupled
to a gallium arsenide infrared-emitting diode in a 4 pin
plastic package.
The single components are mounted opposite one another,
providing a distance between input and output for highest
safety requirements of > 3 mm.
VDE STANDARDS
These couplers perform safety functions according to the
following equipment standards:
• DIN EN 60747-5-2 (VDE 0884)
Optocoupler for electrical safety requirements
• IEC 60065
Safety for mains-operated electronic and related
household apparatus
• VDE 0160
Electronic equipment for electrical power installation
FEATURES
• Rated recurring peak voltage (repetitive)
VIORM = 1450 Vpeak
• Thickness through insulation ≥ 3 mm
• Creepage current resistance according to
VDE 0303/IEC 60112 comparative tracking
index: CTI ≥ 475
• Moisture sensitivity level MSL4
- Follow defined storage and soldering
requirements
• Compliant to RoHS Directive 2002/95/EC and
accordance to WEEE 2002/96/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
in
APPLICATIONS
• Solar and wind power diagnostic, monitoring, and
communication equipment
• Welding equipment
• High voltage motors
• Switch-mode power supplies
• Line receiver
• Computer peripheral interface
• Microprocessor system interface
• Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation):
- for appl. class I to IV at mains voltage ≤ 300 V
- for appl. class I to IV at mains voltage ≤ 600 V
- for appl. class I to III at mains voltage ≤ 1000 V
according to DIN EN 60747-5-2 (VDE 0884)
AGENCY APPROVALS
• DIN EN 60747-5-2 (VDE 0884) (pending)
• UL1577, file no. E76222 system code H, J, and K
(pending)
• VDE related features:
- rated impulse voltage (transient overvoltage),
VIOTM = 12 kVpeak
- isolation test voltage (partial discharge test voltage),
Vpd = 2.8 kVpeak
ORDERING INFORMATION
CNY 6 # XXXS T
CNY64ST
CNY65ST
PART NUMBER
PACKAGE
OPTION
AGENCY CERTIFIED/PACKAGE
UL, VDE
SMD-4 HV, 400 mil high isolation distance
SMD-4 HV, 600 mil high isolation distance
50 to 300
CNY64ST
CNY65ST
CTR BIN
10.16 mm
CTR (%)
5 mA
50 to 150
80 to 240
CNY64AYST
CNY64ABST
CNY65AYST
CNY65ABST
15.24 mm
100 to 300
CNY64AGRST
CNY65AGRST
Rev. 1.0, 20-Sep-11
1 Document Number: 82387
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
http://www.Datasheet4U.com
