ILD207T Datasheet | Vishay

DESCRIPTION The ILD205T, ILD206T, ILD207T, ILD211T, and ILD213T are optically coupled pairs with a Ga As infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD205T, ILD206T, ILD207T, ILD211T, and ILD213T e in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices. A specified minimum and maximum CTR allows a narrow tolerance in the electrical design of the adjacent circuits. The high BVCEO of 70 V gives a higher safety margin pared to the industry standard of 30 V. FEATURES - Two channel coupler - SOIC-8 surface mountable package - Standard lead spacing of 0.05" - Available only on tape and reel option (conforms to EIA standard 481-2) - Isolation test voltage, 4000 VRMS - patible with dual wave, vapor phase and IR reflow soldering - Material categorization: for definitions of pliance please see .vishay./doc?99912 AGENCY APPROVALS - UL - c UL - DIN EN 60747-5-5 (VDE 0884-5), available with option 1 ORDERING INFORMATION AGENCY CERTIFIED / PACKAGE UL, c UL, CQC SOIC-8 40 to 80 ILD205T # # PART NUMBER 63 to 125 ILD206T CTR (%) 10 m A 100 to 200 ILD207T SOIC-8 6.1 mm ≥ 20 ILD211T ≥ 100 ILD213T Rev. 2.3, 13-Jul-2023 Document Number: 83647 For technical questions, contact: optocoupleranswers@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T .vishay....