W25Q128FWEIQ
Description
The W25Q128FW (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices.
Key Features
- New Family of SpiFlash Memories - W25Q128FW: 128M-bit / 16M-byte - Standard SPI: CLK, /CS, DI, DO, /WP, /Hold - Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold - Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3 - QPI: CLK, /CS, IO0, IO1, IO2, IO3 - Software & Hardware Reset
- Highest Performance Serial Flash - 104MHz Single, Dual/Quad SPI clocks - 208/416MHz equivalent Dual/Quad SPI - 50MB/S continuous data transfer rate - More than 100,000 erase/program cycles - More than 20-year data retention
- Efficient “Continuous Read” and QPI Mode - Continuous Read with 8/16/32/64-Byte Wrap - As few as 8 clocks to address memory - Quad Peripheral Interface (QPI) reduces instruction overhead - Allows true XIP (execute in place) operation - Outperforms X16 Parallel Flash
- Low Power, Wide Temperature Range - Single 1.65 to 1.95V supply - 4mA active current, <1µA Power-down (typ.) - -40°C to +85°C operating range
- Flexible Architecture with 4KB sectors - Uniform Sector/Block Erase (4K/32K/64K-Byte) - Program 1 to 256 byte per programmable page - Erase/Program Suspend & Resume
- Advanced Security Features - Software and Hardware Write-Protect - Power Supply Lock-Down and OTP protection - Top/Bottom, Complement array protection - Individual Block/Sector array protection - 64-Bit Unique ID for each device - Discoverable Parameters (SFDP) Register - 3X256-Bytes Security Registers with OTP locks - Volatile & Non-volatile Status Register Bits
- Space Efficient Packaging - 8-pin SOIC 208-mil - 8-pad WSON 6x5-mm / 8x6-mm - 16-pin SOIC 300-mil (additional /RESET pin) - 24-ball TFBGA 8x6-mm - 32-ball WLCSP - Contact Winbond for KGD and other options -5-
