900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Winbond

W968D6DA Datasheet Preview

W968D6DA Datasheet

CellularRAM

No Preview Available !

W968D6DA
256Mb Async./Page,Syn./Burst CellularRAM
1. GENERAL DESCRIPTION
Winbond CellularRAM™ products are high-speed, CMOS pseudo-static random access memories developed for
low-power, portable applications. The device has a DRAM core organized. These devices include an industry-
standard burst mode Flash interface that dramatically increases read/write bandwidth compared with other low-
power SRAM or Pseudo SRAM offerings.
To operate seamlessly on a burst Flash bus, CellularRAM products incorporate a transparent self refresh
mechanism. The hidden refresh requires no additional support from the system memory controller and has no
significant impact on device READ/WRITE performance.
Two user-accessible control registers define device operation. The Bus Configuration Register (BCR) defines how
the CellularRAM device interacts with the system memory bus and is nearly identical to its counterpart on burst
mode Flash devices. The Refresh Configuration Register (RCR) is used to control how refresh is performed on the
DRAM array. These registers are automatically loaded with default settings during power-up and can be updated
anytime during normal operation.
Special attention has been focused on standby current consumption during self refresh. CellularRAM products
include three mechanisms to minimize standby current. Partial array refresh (PAR) enables the system to limit
refresh to only that part of the DRAM array that contains essential data. Temperature compensated refresh (TCR)
uses an on-chip sensor to adjust the refresh rate to match the device temperaturethe refresh rate decreases at
lower temperatures to minimize current consumption during standby. Deep power-down (DPD) enables the system
to halt the refresh operation altogether when no vital information is stored in the device. The system configurable
refresh mechanisms are accessed through the RCR.
This CellularRAM device is compliant with the industry-standard CellularRAM 1.5 generation feature set established
by the CellularRAM Workgroup. It includes support for both variable and fixed latency, with 3 output-device drive-
strength settings, additional wrap options, and a device ID register (DIDR).
2. FEATURES
•Supports asynchronous, page, and burst operations
• VCC, VCCQ Voltages:
1.7V1.95V VCC
1.7V1.95V VCCQ
• Random access time: 70ns
• Burst mode READ and WRITE access:
Configuration:
256Mb 16Mx16
Vcc core voltage supply: 1.8V
VccQ I/O voltage supply: 1.8V
Package: 54 Ball VFBGA
4, 8, 16, or 32 words, or continuous burst
Active current (ICC1) <25mA at 85°C
Burst wrap or sequential
Max clock rate: 133 MHz (tCLK = 7.5ns)
• Page mode READ access:
Sixteen-word page size
Interpage READ access: 70ns
Standby current 400μA (max) at 85°C
Deep power-down: Typical 25μA
Operating temperature range: -40°C ~ 85°C
Intrapage READ access: 20ns
• Low-power features
On-chip temperature compensated refresh (TCR)
Partial array refresh (PAR)
Deep power-down (DPD) mode
Publication Release Date : June 27, 2013
- 1 - Revision : A01-003




Winbond

W968D6DA Datasheet Preview

W968D6DA Datasheet

CellularRAM

No Preview Available !

3. ORDERING INFORMATION
W968D6DA
256Mb Async./Page,Syn./Burst CellularRAM
Part Number VDD/VDDQ I/O Width Type
Others
W968D6DAGX7I 1.8/1.8
x16 PKG CRAM non-Mux,133MHz, -40°C~85°C
Publication Release Date : June 27, 2013
- 2 - Revision : A01-003


Part Number W968D6DA
Description CellularRAM
Maker Winbond
PDF Download

W968D6DA Datasheet PDF





Similar Datasheet

1 W968D6DA CellularRAM
Winbond





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy