Datasheet4U Logo Datasheet4U.com

WSH610 - Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function

General Description

WSH610 is designed to integrate Hall sensor with complementary output drivers and 2-Step thermal protection circuit together on the same chip.

It is carefully designed to protect DC brushless motors to operate on different fault operating condition.

Key Features

  • z Operate from 2.8V to 20V supply voltage. z On-chip Hall sensor. z Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. z High output sinking capability up to 600mA for driving large load. z Available in rugged low profile SOT-25 , SIP-4L packages. z Built-in protection diode for reverse power supply fault. z Built-in 2-Step Lock protection and auto-restart function. General.

📥 Download Datasheet

Datasheet Details

Part number WSH610
Manufacturer Winson Semiconductor
File Size 288.66 KB
Description Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function
Datasheet download datasheet WSH610 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WSH132 Unipolar Hall Effect Switch Winson
WSH136 Linear Hall Effect Sensor Winson
WSH137 Linear Hall Effect Sensor Winson
WSH138 Linear Hall Effect Sensor Winson
WSH201 Linear Hall Effect Sensor IC Winson

Other Datasheets by Winson Semiconductor

Part Number Description
WSH1132 Unipolar Hall Effect Switch IC
WSH130 Hall Effect Sensor
WSH130NL Unipolar Hall Effect Switch
WSH131 Omnipolar Hall Effect Switch
WSH133 Bipolar Hall Effect Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com WSH610 Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function Features: z Operate from 2.8V to 20V supply voltage. z On-chip Hall sensor. z Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. z High output sinking capability up to 600mA for driving large load. z Available in rugged low profile SOT-25 , SIP-4L packages. z Built-in protection diode for reverse power supply fault. z Built-in 2-Step Lock protection and auto-restart function. General Description: WSH610 is designed to integrate Hall sensor with complementary output drivers and 2-Step thermal protection circuit together on the same chip.