Datasheet4U Logo Datasheet4U.com

WM8802 - Digital Audio Interface Transceiver

Description

The WM8802 is a digital audio interface transceiver conforming to IEC 60958/61937 and EIAJ CP-1201.

The device supports data sampling input rates of up to 192 kHz.

Data input to the serial digital audio data input pin can also be modulated.

Features

  • up to 6 data inputs and 1 data output. Data can be demodulated using the on-board PLL or with the use of an external clock source. The WM8802 is controlled via a 4-wire CCB compatible control interface. This interface provides access to the channel status bits. The WM8802 also provides a number of flag outputs including PCM data valid, de-emphasis, lock and IEC 61937, DTS-CD/LD detection. The device is available in a small 48-pin SQFP package.

📥 Download Datasheet

Datasheet Details

Part number WM8802
Manufacturer Wolfson Microelectronics
File Size 502.70 KB
Description Digital Audio Interface Transceiver
Datasheet download datasheet WM8802 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WM8803 DIGITAL AUDIO INTERFACE RECEIVER Wolfson Microelectronics plc
WM8816 Stereo Digital Volume Control Wolfson Microelectronics plc
WM8860 Multi-channel High Definition Audio CODEC Cirrus Logic
WM8141 12-bit 6MSPS CIS/CCD Analogue Front End/Digitiser Wolfson Microelectronics plc
WM8143-10 10-bit/6MSPS CCD Signal Processor Wolfson Microelectronics plc

Other Datasheets by Wolfson Microelectronics

Part Number Description
WM8804 1:1 Digital Interface Transceiver
WM8805 8:1 Digital Interface Transceiver
WM8850 Multi Channel HDA CODEC
WM8144-12 Integrated 12-bit Data Acquisition System
WM8152 Single Channel 16-bit CIS/CCD AFE

Full PDF Text Transcription

Click to expand full text
w WM8802 Digital Audio Interface Transceiver DESCRIPTION The WM8802 is a digital audio interface transceiver conforming to IEC 60958/61937 and EIAJ CP-1201. The device supports data sampling input rates of up to 192 kHz. Data input to the serial digital audio data input pin can also be modulated. The WM8802 features up to 6 data inputs and 1 data output. Data can be demodulated using the on-board PLL or with the use of an external clock source. The WM8802 is controlled via a 4-wire CCB compatible control interface. This interface provides access to the channel status bits. The WM8802 also provides a number of flag outputs including PCM data valid, de-emphasis, lock and IEC 61937, DTS-CD/LD detection. The device is available in a small 48-pin SQFP package.
Published: |