900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






XECOM

XE232NET Datasheet Preview

XE232NET Datasheet

Low Cost Serial-to-Ethernet Bridge

No Preview Available !

Preliminary
XE232NET
June 2007
Low Cost Serial-to-Ethernet Bridge for Embedded Applications
Description
The Xecom XE232NET Serial-to-Ethernet Bridge
modules provide a simple solution for connecting
micro-controller based embedded systems to a Local
Area Network. These modules include all of the
hardware and software needed to link the serial port
on the micro-controller to the local area network.
The XE232NET Serial-to-Ethernet bridge operates
much the same as any Xecom serial modem. AT
commands are used for control and configuration of
The XE232NET. The XE232NET also utilizes the
same pin configuration as the Xecom XE5690SM
modem family. This permits one design to support
either Ethernet or dial-up modem connectivity with a
simple module swap.
Xecom offers two versions of the XE232NET. The
XE232NET-1 with the Ethernet isolation transformer
and the XE232NET-2 without the isolation
transformer. An Evaluation Kit is available, model
number XE232NET-K
Features
Miniature Dual-In-line Package: 2.1” x 1.0”
• TTL compatible serial interface;
• Operates from a single +3.3 volt power supply
• Includes 10 Base-T Ethernet MAC and PHY
• Embedded protocols include, Ethernet, TCP, IP, UDP,
ICMP, DHCP, ARP, HTTP, POP3, and SMTP
• Command and control with Serial AT Commands
• IEEE 10BASE-T compatible
Models
XE232NET-1: Serial-to-Ethernet Bridge module with
Ethernet isolation transformer included
• XE232NET-2: Serial-to-Ethernet Bridge module
without isolation transformer.
• XE232NET-K: Ethernet Evaluation Kit includes
XE232NET-1; evaluation board, required cables, and
power supply
XE232NET-1ITR: XE232NET-1 with an operating
range of -40C to +85C
• XE232NET-2ITR: XE232NET-2 with an operating
range of -40C to +85C
XE232NET Block Diagram
XECOM
1 XE232NET




XECOM

XE232NET Datasheet Preview

XE232NET Datasheet

Low Cost Serial-to-Ethernet Bridge

No Preview Available !

XE232NET Mechanical Specifications
XECOM
Dim Description
a Module Length
b Module Width
c Module Height*
d Total Pin Row Length
e Pin 2 to Pin 3
f Adjacent Pins
g Pin 15 to Pin 16
h Last Pin to edge
i Pin Row to Pin Row
J Pin Length
Inches
2.10
1.00
0.32
2.00
1.50
0.10
0.90
0.05
0.90
0.15
MM
53.3
25.4
8.1
50.8
38.1
2.5
22.9
1.3
22.9
3.8
* Module Height with onboard transformer, XE232NET-1
Interface Pins are .025 inches square
2 XE232NET


Part Number XE232NET
Description Low Cost Serial-to-Ethernet Bridge
Maker XECOM
Total Page 12 Pages
PDF Download

XE232NET Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 XE232NET Low Cost Serial-to-Ethernet Bridge
XECOM





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy