AZ9701 Datasheet | ZETTLER Electronics

FEATURES - Up to 45 Amp switching capability in a pact size - Epoxy sealed versions available - Coils to 24 VDC - Small footprint - 1 Form A and C contacts available - Vibration and shock resistant - ISO/TS 16949, ISO9001, ISO14000 - Cost effective - Designed for high in-rush applications - UL,CUR file E43203 CONTACTS Arrangement Ratings UL, CUR Material Resistance SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: Form A: 630 W Form C: 630 W/420W N.O./N.C. Max. switched current: Form A: 45 A Form C: 45 A/30A N.O./N.C. Max. switched voltage: 150- VDC Max. carry current: 60 A - If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. 45A at 14VDC res. 10k cycles (1Form A) Silver tin oxide < 100 milliohms initially (6V, 1A voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 484-573 m W standard coil 675 m W sensitive coil 4.2W 20°C (68°F) ambient 50°C (90°F) nominal coil VDC 155°C (311°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 5 x 106 operations 1 x 105 40 A 14 VDC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 500 VDC coil to contact (at sea level for 1 min.) 500 VDC between open contacts Insulation Resistance 500 megohms min. at 20°C (68°F), 500 VDC, 50% RH Dropout Greater than 6% of nominal coil voltage Ambient...