Datasheet4U Logo Datasheet4U.com

TSL2584TSV - Light-to-Digital Device

Description

The TSL2584TSV is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface.

Features

  • The benefits and features of TSL2584TSV, Light-to-Digital Device are listed below: Benefits Approximates Human Eye Response Flexible Operation Suited for Operation Behind Dark Glass Low Operating Overhead Low Power Industry standard two-wire interface Ultra-Small foot-print Unlimited Manufacturing Floor Life Features.
  • Dual Diode with Photopic Filter.
  • Programmable Analog Gain and Integration Time.
  • 1,000,000: 1 Dynamic Range.
  • Programmable Upper and Lower Thres.

📥 Download Datasheet

Datasheet preview – TSL2584TSV

📁 Similar Datasheet

  • TSL2580 - LIGHT-TO-DIGITAL CONVERTER (TAOS)
  • TSL2581 - LIGHT-TO-DIGITAL CONVERTER (TAOS)
  • TSL2583 - LIGHT-TO-DIGITAL CONVERTER (TAOS)
  • TSL250-080 - PTC Devices (Tyco Electronics)
  • TSL250-080 - POLYSWITCH (Tyco Electronics)
  • TSL250-080F - POLYSWITCH (Tyco Electronics)
  • TSL250-080F - Resettable PPTC (Littelfuse)
  • TSL250-130F - Resettable PPTC (Littelfuse)
  • TSL250R - (TSL250R - TSL252R) LIGHT-TO-VOLTAGE OPTICAL SENSORS (TAOS)
  • TSL250RD - LIGHT-TO-VOLTAGE OPTICAL SENSORS (TAOS)
Other Datasheets by ams
  • TSL2580 - Light-to-Digital Converter
  • TSL2581 - Light-to-Digital Converter
  • TSL2585 - Miniature Ambient Light Sensor
  • TSL2540 - Light-to-Digital Sensor
  • TSL2541 - Light-to-Digital Sensor
  • TSL2561 - Light-to-Digital Converter
  • TSL257 - High-Sensitivity Light-to-Voltage Converter
  • TSL2571 - Light-to-Digital Converter

Full PDF Text Transcription

Click to expand full text
TSL2584TSV Light-to-Digital Device General Description The TSL2584TSV is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared), one infrared-responding photodiode, and a photopic infrared-blocking filter on a single CMOS integrated circuit. Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
Published: |