74HCT373 Datasheet | Texas Instruments

description /ordering information The ’HCT373 devices are octal transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs. CD54HCT373 . . . F PACKAGE CD74HCT373 . . . E OR M PACKAGE (TOP VIEW) OE 1 1Q 2 1D 3 2D 4 2Q 5 3Q 6 3D 7 4D 8 4Q 9 GND 10 20 VCC 19 8Q 18 8D 17 7D 16 7Q 15 6Q 14 6D 13 5D 12 5Q 11 LE A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup ponents. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP - E Tube CD74HCT373E CD74HCT373E Tube - 55°C to 125°C SOIC - M Tape and reel CD74HCT373M HCT373M CD74HCT373M96 CDIP - F Tube CD54HCT373F3A CD54HCT373F3A † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include...