CC2510F32
CC2510F32 is Low-Power SoC manufactured by Texas Instruments.
- Part of the CC2510F8 comparator family.
- Part of the CC2510F8 comparator family.
Description
The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (So C) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx bines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 k B of in-system programmable flash memory and 4 k B of RAM, and many other powerful features
. The small 6x6 mm package makes it very suited for applications with size limitations.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
- RF enabled remote controls
- Wireless sports and leisure equipment
- Low power telemetry
- CC2511Fx: USB dongles
Key Features
- Radio o High-performance RF transceiver based on the market-leading CC2500 o Excellent receiver selectivity and blocking performance o High sensitivity (- 103 d Bm at 2.4 k Baud) o Programmable data rate up to 500 k Baud o Programmable output power up to 1 d Bm for all supported frequencies o Frequency range: 2400
- 2483.5 MHz o Digital RSSI / LQI support
- Current Consumption o Low current consumption (RX: 17.1 m A @ 2.4 k Baud, TX: 16 m A @
- 6 d Bm output power) o 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- MCU, Memory, and Peripherals o High performance and low power 8051 microcontroller core. o 8/16/32 k B in-system programmable flash, and 1/2/4 k B RAM o Full-Speed USB Controller with 1 k B USB FIFO (CC2511Fx ) o I2S interface o 7
- 12 bit ADC with up to eight inputs o 128-bit AES security coprocessor o Powerful DMA functionality o Two USARTs o 16-bit timer with DSM mode o Three 8-bit timers o Hardware debug support o 21 (CC2510Fx ) or 19 (CC2511Fx )...
