CD74HCT574 Datasheet | Texas Instruments

CD54HC374, CD74HC374, CD54HCT374, CD74HCT374, CD54HC574, CD74HC574, CD54HCT574, CD74HCT574 SCHS183E - NOVEMBER 1998 - REVISED OCTOBER 2022 CDx4HC374 High-Speed CMOS Logic Octal D-Type Flip-Flop, 3-State Positive-Edge Triggered 1 Features - Buffered inputs - mon three-state output enable control - Three-state outputs - Bus line driving capability - Typical propagation delay (clock to Q) = 15 ns at VCC = 5 V, CL = 15 p F, TA = 25℃ - Fanout (over temperature range) - Standard outputs: 10 LSTTL loads - Bus driver outputs: 15 LSTTL loads - Wide operating temperature range: - 55℃ to 125℃ - Balanced propagation delay and transition times - Significant power reduction pared to LSTTL Logic ICs - HC types - 2-V to 6-V operation - High noise immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5 V - HCT types - 4.5-V to 5.5-V Operation - Direct LSTTL input logic patibility, VIL = 0.8 V (max), VIH = 2 V (min) - CMOS input patibility, II ≤ 1μA at VOL, VOH 2 Description The ’HC374, ’HCT374, ’HC574, and ’HCT574 are octal D-type flip-flops with 3-state outputs and the capability to drive 15 LSTTL loads. The eight edgetriggered flip-flops enter data into their registers on the LOW to HIGH transition of clock (CP). The output enable (OE) controls the 3-state outputs and is independent of the register operation. When OE is HIGH, the outputs are in the high-impedance state. The 374 and 574 are identical in function and differ only in their pinout...