Datasheet4U Logo Datasheet4U.com

DLPR910 - Configuration PROM

Description

The DLPR910 device is a programmed PROM used to properly configure the DLPC910 Controller to operate four different digital micromirror device (DMD) options: the DLP9000X, the DLP9000XUV, and the DLP6500 family (S600 and Type A packages).

Features

  • 1 Pre-Programmed Xilinx® PROM Configures the DLPC910 DMD Digital Controller.
  • I/O Pins Compatible With 1.8 V to 3.3 V.
  • 1.8 V Core Supply Voltage.
  • 40°C to 85°C Operating Temperature Range 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DLP-IO8-G USB-BASED 8-CHANNEL DATA ACQUISITION MODULE DLP Design
DLP05LC LOW CAPACITANCE UNIDIRECTIONAL TVS Diodes Incorporated
DLP0NSA150HL2 Chip Common Mode Choke Coil Murata
DLP0NSC280HL2 Chip Common Mode Choke Coil Murata
DLP0NSN121HL2 Chip Common Mode Choke Coil Murata

Other Datasheets by Texas Instruments

Part Number Description
DLPR410 Configuration PROM
DLP2000 digital micromirror device - DMD
DLP2010 WVGA DMD
DLP2010NIR WVGA Near-Infrared DMD
DLP230GP 0.23 qHD S246

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community DLPR910 DLPS065C – SEPTEMBER 2015 – REVISED DECEMBER 2019 DLPR910 Configuration PROM 1 Features •1 Pre-Programmed Xilinx® PROM Configures the DLPC910 DMD Digital Controller • I/O Pins Compatible With 1.8 V to 3.3 V • 1.
Published: |