Datasheet4U Logo Datasheet4U.com

DP83867E - High Immunity Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver

Download the DP83867E datasheet PDF. This datasheet also covers the DP83867CS variant, as both devices belong to the same high immunity small form factor 10/100/1000 ethernet physical layer transceiver family and are provided as variant models within a single manufacturer datasheet.

General Description

The DP83867 device is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASETX and 1000BASE-T Ethernet protocols.

Optimized for ESD protection, the DP83867 exceeds 8kV IEC 61000-4-2 (direct contact).

Key Features

  • Extra low latency TX < 90ns, RX < 290ns.
  • Time Sensitive Network (TSN) compliant.
  • Low power consumption: 457mW.
  • Exceeds 8000V IEC 61000-4-2 ESD protection.
  • Meets EN55011 class B emission standards.
  • 16 programmable RGMII delay modes on RX/TX.
  • Integrated MDI termination resistors.
  • Programmable MAC interface termination impedance.
  • WoL (Wake-on-LAN) packet detection.
  • 25MHz or 125MHz synchronized clock output.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DP83867CS-etcTI.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number DP83867E
Manufacturer Texas Instruments
File Size 2.80 MB
Description High Immunity Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver
Datasheet download datasheet DP83867E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DP83861 Gig PHYTER 10/100/1000 Ethernet Physical Layer National Semiconductor
DP83864 Quad GigPHYTER 10/100/1000 Ethernet Physical Layer National Semiconductor
DP83865 Gig PHYTER V 10/100/1000 Ethernet Physical Layer National Semiconductor
DP83815 10/100 Mb/s Integrated PCI Ethernet Media Access Controller and Physical Layer National Semiconductor
DP83816 10/100 Mb/s Integrated PCI Ethernet Media Access Controller and Physical Layer National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
DP83867CR High Immunity 10/100/1000 Ethernet Physical Layer Transceiver
DP83867CS High Immunity Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver
DP83867IR High Immunity 10/100/1000 Ethernet Physical Layer Transceiver
DP83867IS High Immunity Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver
DP83815 10/100Mb/s Integrated PCI Ethernet Media Access Cntr Physical Layer MacPhyter (Rev. E)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DP83867CS, DP83867IS, DP83867E SNLS504F – OCTOBER 2015 – REVISED JANUARY 2025 DP83867E/IS/CS Robust, High Immunity, Small Form Factor 10/100/1000 Ethernet Physical Layer Transceiver 1 Features • Extra low latency TX < 90ns, RX < 290ns • Time Sensitive Network (TSN) compliant • Low power consumption: 457mW • Exceeds 8000V IEC 61000-4-2 ESD protection • Meets EN55011 class B emission standards • 16 programmable RGMII delay modes on RX/TX • Integrated MDI termination resistors • Programmable MAC interface termination impedance • WoL (Wake-on-LAN) packet detection • 25MHz or 125MHz synchronized clock output • Start of Frame Detect for IEEE 1588 time stamp • RJ45 mirror mode • Fully compatible to IEEE 802.