Datasheet4U Logo Datasheet4U.com

ISO1044 Datasheet Isolated Can Fd Transceiver

Manufacturer: Texas Instruments

Overview: www.ti.com ISO1044 SLLSFB0A – MARCH 2020 – REVISEDIJSUOLY12004240 SLLSFB0A – MARCH 2020 – REVISED JULY 2020 ISO1044 Isolated CAN FD Transceiver in Small Package.

General Description

The ISO1044B device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard.

The ISO1044B device offers ±58-V DC bus fault protection and ±12-V common-mode voltage range.

The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN.

Key Features

  • Meets the ISO 11898-2:2016 physical layer standard.
  • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps.
  • Protection features.
  • DC Bus Fault Protection Voltage: ±58 V.
  • IEC ESD tolerance on bus pins: ±8 kV.
  • HBM ESD tolerance on bus pins: ±10 kV.
  • Driver dominant time out (TXD DTO).
  • Undervoltage protection on VCC1 and VCC2.
  • Common-mode voltage range: ±12 V.
  • Ideal passive, high impedance b.

More Datasheets from Texas Instruments

Part Number Description
ISO1042 CAN Transceiver
ISO1042-Q1 Automotive Isolated CAN Transceiver
ISO1050 CAN Transceiver
ISO1176 RS-485 Profibus Transceiver
ISO1176T Profibus RS-485 Transceiver
ISO1211 24-V to 60-V Digital Input Receivers
ISO1212 24-V to 60-V Digital Input Receivers
ISO122 Precision Lowest-Cost Isolation Amplifier
ISO124 Precision Isolation Amplifier
ISO1410 RS-485/RS-422 Transceiver

ISO1044 Distributor