LM108AJAN Datasheet | Texas Instruments

OBSOLETE .ti. SNOSAJ6C - FEBRUARY 2005 - REVISED APRIL 2013 LM108AJAN Operational Amplifiers Check for Samples: LM108AJAN Features - 2 Maximum Input Bias Current of 3.0 n A over Temperature - Offset Current less than 400 p A over Temperature - Supply Current of only 300 μA, even in Saturation - Ensured Drift Characteristics DESCRIPTION The LM108 is a precision operational amplifier having specifications a factor of ten better than FET amplifiers over a - 55°C to +125°C temperature range. The devices operate with supply voltages from ±2V to ±20V and have sufficient supply rejection to use unregulated supplies. Although the circuit is interchangeable with, and uses the same pensation as the LM101A, an alternate pensation scheme can be used to make it particularly insensitive to power supply noise and to make supply bypass capacitors unnecessary. The low current error of the LM108 makes possible many designs that are not practical with conventional amplifiers. In fact, it operates from 10 MΩ source resistances, introducing less error than devices such as the 709 with 10 kΩ sources. Integrators with drifts less than 500 μV/sec and analog time delays in excess of one hour can be made using capacitors no larger than 1 μF. Connection Diagrams - Package is connected to Pin 4 (V- ) - - Unused pin (no internal connection) to allow for input anti-leakage guard ring on printed circuit board layout. Figure 1. Metal Can Package - TO-99 Package Number LMC Figure 2. Dual-In-Line Package (Top View) CDIP - Package Number NAB Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard...