Datasheet4U Logo Datasheet4U.com

LM5035B - PWM Controller

General Description

The LM5035B Half-Bridge Controller/Gate Driver contains all of the

Key Features

  • 1.
  • 2 105V / 2A Half-Bridge Gate Drivers.
  • Synchronous Rectifier Control Outputs with Programmable Delays.
  • Synchronous Rectifiers Turned Off in Shutdown Modes.
  • Reduced Deadtime Between High and Low Side Drive for Higher Maximum Duty Cycle.
  • High Voltage (105V) Start-up Regulator.
  • Voltage mode Control with Line Feed-Forward and Volt Second Limiting.
  • Resistor Programmed, 2MHz Capable Oscillator.
  • Programmable Line Under-Voltage L.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM5035B PWM Controller National Semiconductor
LM5035 PWM Controller with Integrated Half-Bridge and SyncFET Drivers National Semiconductor
LM5035A PWM Controller National Semiconductor
LM5035A-1 PWM Controller National Semiconductor
LM5030 100V Push-Pull Current Mode PWM Controller National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM5035 PWM Controller
LM5035A PWM Controller
LM5035C PWM Controller
LM5030 100-V Push-Pull Current Mode PWM Controller
LM5032 High-Voltage Dual Interleaved Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM5035B www.ti.com SNVS613C – JULY 2009 – REVISED APRIL 2013 LM5035B PWM Controller with Integrated Half-Bridge and SyncFET Drivers Check for Samples: LM5035B FEATURES 1 •2 105V / 2A Half-Bridge Gate Drivers • Synchronous Rectifier Control Outputs with Programmable Delays • Synchronous Rectifiers Turned Off in Shutdown Modes. • Reduced Deadtime Between High and Low Side Drive for Higher Maximum Duty Cycle.