Datasheet4U Logo Datasheet4U.com

LMV115 Datasheet GSM Baseband 30MHz 2.8V Oscillator Buffer

Manufacturer: Texas Instruments

📥 Download Datasheet

General Description

The LMV115 is a 30MHz buffer specially designed to minimize the effects of spurious signals from the base band chip to the oscillator.

The buffer also minimizes the influence of varying load resistance and capacitance to the oscillator and increases the drive capability.

The input of the LMV115 is internally biased with two equal resistors to the power supply rails.

Overview

OBSOLETE LMV115 www.ti.com SNOSA81B – DECEMBER 2003 – REVISED APRIL 2013 LMV115 GSM Baseband 30MHz 2.

Key Features

  • 1.
  • 2 (Typical 2.8V Supply; Values Unless Otherwise Specified).
  • Low Supply Current: 0.3mA.
  • 2.5V to 3.3V Supply.
  • AC Coupling Possible Without External Bias Resistors.
  • Includes Shutdown Function External Oscillator.
  • SC70-6 Pin Package 2.1 x 2mm.
  • Operating Temperature Range.
  • 40°C to 85°C.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
National Semiconductor Logo LMV115 GSM Baseband 30MHz 2.8V Oscillator Buffer National Semiconductor

More Datasheets from Texas Instruments

Part Number Description
LMV112 LMV112 40 MHz Dual Clock Buffer (Rev. B)
LMV116 LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B)
LMV118 LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B)
LMV1012 LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H)
LMV1015 LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B)
LMV1024 PDM Output with Pre-Amplifier
LMV1026 PDM Output with Pre-Amplifier
LMV1031 LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B)
LMV1032 LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G)
LMV1088 Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J)