900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

MSP430F5325 Datasheet Preview

MSP430F5325 Datasheet

Mixed-Signal Microcontrollers

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
MSP430F5329, MSP430F5328, MSP430F5327
MSP430F5326, MSP430F5325, MSP430F5324
SLAS678F – AUGUST 2010 – REVISED SEPTEMBER 2019
MSP430F532x Mixed-Signal Microcontrollers
1 Device Overview
1.1 Features
1
• Low Supply Voltage Range:
3.6 V Down to 1.8 V
• Ultra-Low Power Consumption
– Active Mode (AM):
All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program
Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program
Execution (Typical)
– Standby Mode (LPM3):
Real-Time Clock (RTC) With Crystal, Watchdog,
and Supply Supervisor Operational, Full RAM
Retention, Fast Wakeup:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General-Purpose
Counter, Watchdog, and Supply Supervisor
Operational, Full RAM Retention, Fast Wakeup:
1.4 µA at 3 V (Typical)
– Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wakeup:
1.1 µA at 3 V (Typical)
– Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
• Wake up From Standby Mode in 3.5 µs (Typical)
• 16-Bit RISC Architecture, Extended Memory, up to
25-MHz System Clock
• Flexible Power-Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
– Supply Voltage Supervision, Monitoring, and
Brownout
• Unified Clock System
– FLL Control Loop for Frequency Stabilization
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
– 32-kHz Watch Crystals (XT1)
– High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces
(USCIs)
– USCI_A0 and USCI_A1 Each Support:
– Enhanced UART Supports Automatic Baud-
Rate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1 Each Support:
– I2C
– Synchronous SPI
• Integrated 3.3-V Power System
• 12-Bit Analog-to-Digital Converter (ADC) With
Internal Reference, Sample-and-Hold, and
Autoscan Feature
• Comparator
• Hardware Multiplier Supports 32-Bit Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• 3-Channel Internal DMA
• Basic Timer With RTC Feature
Device Comparison Summarizes the Available
Family Members
1.2 Applications
• Analog and Digital Sensor Systems
• Data Loggers
• General-Purpose Applications
1.3 Description
The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different
sets of peripherals targeted for various applications. The architecture, combined with extensive low-power
modes is optimized to achieve extended battery life in portable measurement applications. The device
features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to
maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-
power modes to active mode in 3.5 µs (typical).
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

MSP430F5325 Datasheet Preview

MSP430F5325 Datasheet

Mixed-Signal Microcontrollers

No Preview Available !

MSP430F5329, MSP430F5328, MSP430F5327
MSP430F5326, MSP430F5325, MSP430F5324
SLAS678F – AUGUST 2010 – REVISED SEPTEMBER 2019
www.ti.com
The MSP430F5329, MSP430F5327, and MSP430F5325 are microcontroller configurations with an
integrated 3.3-V LDO, four 16-bit timers, a high-performance 12-bit ADC, two USCIs, a hardware
multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins.
The MSP430F5328, MSP430F5326, and MSP430F5324 include all of these peripherals but have 47 I/O
pins.
Typical applications include analog and digital sensor systems, data loggers, and various general-purpose
applications.
For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide.
PART NUMBER
Device Information(1)
PACKAGE
BODY SIZE(2)
MSP430F5329IPN
LQFP (80)
12 mm × 12 mm
MSP430F5328IZQE
MicroStar Junior™ BGA (80)
5 mm × 5 mm
MSP430F5328IRGC
VQFN (64)
9 mm × 9 mm
(1) For the most current part, package, and ordering information, see the Package Option Addendum in
Section 8, or see the TI website at www.ti.com.
(2) The sizes shown here are approximations. For the package dimensions with tolerances, see the
Mechanical Data in Section 8.
2 Device Overview
Copyright © 2010–2019, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430F5329 MSP430F5328 MSP430F5327 MSP430F5326 MSP430F5325 MSP430F5324


Part Number MSP430F5325
Description Mixed-Signal Microcontrollers
Maker etcTI
Total Page 30 Pages
PDF Download

MSP430F5325 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MSP430F5324 Mixed-Signal Microcontrollers
etcTI
2 MSP430F5325 Mixed-Signal Microcontrollers
etcTI
3 MSP430F5326 Mixed-Signal Microcontrollers
etcTI
4 MSP430F5327 Mixed-Signal Microcontrollers
etcTI
5 MSP430F5328 Mixed-Signal Microcontrollers
etcTI
6 MSP430F5328-EP Mixed-Signal Microcontrollers
etcTI
7 MSP430F5329 Mixed-Signal Microcontrollers
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy