Datasheet4U Logo Datasheet4U.com

SN54HC367 Datasheet Hex Buffers And Line Drivers

Manufacturer: Texas Instruments

Overview: SN54HC367, SN74HC367 SCLS309E – JANUARY 1996 – REVISED MARCH 2022 SNx4HC367 Hex Buffers and Line Drivers with 3-State Outputs.

General Description

The SNx4HC367 is a hex buffer with 3-state outputs.

The device is configured into two banks, one with four drivers and one with two drivers, each controlled by its own output enable pin.

PART NUMBER SN54HC367J SN74HC367D SN74HC367N SN74HC367NS SN74HC367PW Device Information PACKAGE(1) BODY SIZE (NOM) CDIP (16) 24.38 mm × 6.92 mm SOIC (16) 9.90 mm × 3.90 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm (1) For all available packages, see the orderable addendum at the end of the data sheet.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • High-current 3-state outputs drive bus lines, buffer memory address registers, or drive up to 15 LSTTL loads.
  • True outputs.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 10 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1µA max 1 1OE 2.

SN54HC367 Distributor & Price

Compare SN54HC367 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.

More Datasheets from Texas Instruments

Part Number Description
SN54HC365 HEX BUFFERS AND LINE DRIVERS
SN54HC32 Quadruple 2-Input Positive-OR Gates
SN54HC32J Quadruple 2-Input Positive-OR Gates
SN54HC32W Quadruple 2-Input Positive-OR Gates
SN54HC373 OCTAL TRANSPARENT D-TYPE LATCHES
SN54HC374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HC377 OCTAL D-TYPE FLIP-FLOPS
SN54HC377J OCTAL D-TYPE FLIP-FLOPS
SN54HC393 DUAL 4-BIT BINARY COUNTERS
SN54HC00 Quadruple 2-Input Positive-NAND Gates