Datasheet4U Logo Datasheet4U.com

SN74HC367 Datasheet Hex Buffers And Line Drivers

Manufacturer: Texas Instruments

Overview: SN54HC367, SN74HC367 SCLS309E – JANUARY 1996 – REVISED MARCH 2022 SNx4HC367 Hex Buffers and Line Drivers with 3-State Outputs.

General Description

The SNx4HC367 is a hex buffer with 3-state outputs.

The device is configured into two banks, one with four drivers and one with two drivers, each controlled by its own output enable pin.

PART NUMBER SN54HC367J SN74HC367D SN74HC367N SN74HC367NS SN74HC367PW Device Information PACKAGE(1) BODY SIZE (NOM) CDIP (16) 24.38 mm × 6.92 mm SOIC (16) 9.90 mm × 3.90 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm (1) For all available packages, see the orderable addendum at the end of the data sheet.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • High-current 3-state outputs drive bus lines, buffer memory address registers, or drive up to 15 LSTTL loads.
  • True outputs.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 10 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1µA max 1 1OE 2.

SN74HC367 Distributor & Price

Compare SN74HC367 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.

More Datasheets from Texas Instruments

Part Number Description
SN74HC365 HEX BUFFERS AND LINE DRIVERS
SN74HC32 Quadruple 2-Input Positive-OR Gates
SN74HC32D Quadruple 2-Input Positive-OR Gates
SN74HC32N Quadruple 2-Input Positive-OR Gates
SN74HC373 OCTAL TRANSPARENT D-TYPE LATCHES
SN74HC374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN74HC377 OCTAL D-TYPE FLIP-FLOPS
SN74HC377N OCTAL D-TYPE FLIP-FLOPS
SN74HC393 DUAL 4-BIT BINARY COUNTERS
SN74HC00 Quadruple 2-Input Positive-NAND Gates