Datasheet4U Logo Datasheet4U.com

SN74LVC16373A-EP - 16-Bit Transparent D-Type Latch

General Description

This 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC16373A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

Key Features

  • Member of the Texas Instruments Widebus™ Family.
  • Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 4.2 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC).
  • Latc.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC16373A 16-Bit Transparent D-Type Latch
SN74LVC16373 16-Bit Transparent D-Type Latch
SN74LVC16374 16-Bit Edge-Triggered D-Type Flip-Flop
SN74LVC16374A 16-Bit Edge-Triggered D-Type Flip-Flop
SN74LVC161284 19-BIT BUS INTERFACE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LVC16373A-EP 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS SCAS825 – JUNE 2006 FEATURES • Member of the Texas Instruments Widebus™ Family • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Ioff Supports Partial-Power-Down Mode Operation • Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 1000-V Charged-Device Model (C101) DESCRIPTION/ ORDERING INFORMATION This 16-bit transparent D-type latch is designed for 1.65-V to 3.