Datasheet4U Logo Datasheet4U.com

SNJ54HCT74W Datasheet Dual D-type Positive-edge-triggered Flip-flops

Manufacturer: Texas Instruments

Overview: SN54HCT74, SN74HCT74 SCLS169G – DECEMBER 1982 – REVISED OCTOBER 2022 SNx4HCT74 Dual D-Type Positive-Edge-Triggered Flip-Flips With Clear and Preset.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The ’HCT74 devices contain two independent D-type positive-edge-triggered flip-flops.

A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.

When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock (CLK) pulse.

Key Features

  • Operating voltage range of 4.5 V to 5.5 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 40-μA max ICC.
  • Typical tpd = 17 ns.
  • ±4-mA output drive at 5 V.
  • Low input current of 1 μA max.
  • Inputs are TTL-voltage compatible 2.

More Datasheets from Texas Instruments

Part Number Description
SNJ54HCT74J DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
SNJ54HCT139J DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXER
SNJ54HCT139W DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXER
SNJ54HCT157FK QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER
SNJ54HCT157J QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER
SNJ54HCT157W QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER
SNJ54HCT32FK QUADRUPLE 2-INPUT POSITIVE-OR GATES
SNJ54HCT32J QUADRUPLE 2-INPUT POSITIVE-OR GATES
SNJ54HCT32W QUADRUPLE 2-INPUT POSITIVE-OR GATES
SNJ54HCT377J OCTAL D-TYPE FLIP-FLOPS

SNJ54HCT74W Distributor