Datasheet4U Logo Datasheet4U.com

TLC59116 - 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver

General Description

The TLC59116 is an I2C bus controlled 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) color mixing and backlight application.

Key Features

  • 16 LED Drivers (Each Output Programmable at Off, On, Programmable LED Brightness, or Programmable Group Dimming and Blinking Mixed With Individual LED Brightness).
  • 16 Constant-Current Output Channels.
  • 256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully Off (Default) to Maximum Brightness Using a 97-kHz PWM Signal.
  • 256-Step Group Brightness Control Allows General Dimming [Using a 190-Hz PWM Signal From Fully Off to Maximum Brightn.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLC555 CMOS General Purpose Timer Chips Winner
TLC-MSMD010 PPTC Fuse BETTER
TLC-MSMD014 PPTC Fuse BETTER
TLC-MSMD020 PPTC Fuse BETTER
TLC-MSMD030 PPTC Fuse BETTER

Other Datasheets by Texas Instruments

Part Number Description
TLC59116-Q1 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver
TLC59116F 16-Channel Fast-Mode Plus I2C Bus LED Driver
TLC5911 LED DRIVER
TLC5910 LED DRIVER
TLC59108 8-Bit Fm+ I2C-Bus Constant-Current LED Sink Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TLC59116 SLDS157E – FEBRUARY 2008 – REVISED DECEMBER 2014 TLC59116 16-Channel FM+ I2C-Bus Constant-Current LED Sink Driver 1 Features • 16 LED Drivers (Each Output Programmable at Off, On, Programmable LED Brightness, or Programmable Group Dimming and Blinking Mixed With Individual LED Brightness) • 16 Constant-Current Output Channels • 256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully Off (Default) to Maximum Brightness Using a 97-kHz PWM Signal • 256-Step Group Brightness Control Allows General Dimming [Using a 190-Hz PWM Signal From Fully Off to Maximum Brightness (Default)] • 256-Step Group Blinking With Frequency Programmable From 24 Hz to 10.