TLV61220
TLV61220 is Low-Input Voltage Step-Up Converter manufactured by Texas Instruments.
Features
- 1 Up to 95% Efficiency at Typical Operating Conditions
- 5.5-μA Quiescent Current
- Startup Into Load at 0.7-V Input Voltage
- Operating Input Voltage from 0.7 V to 5.5 V
- Pass-Through Function during Shutdown
- Minimum Switching Current 200 m A
- Protections:
- Output Overvoltage
- Overtemperature
- Input Undervoltage Lockout
- Adjustable Output Voltage from 1.8 V to 5.5 V
- Small 6-pin Thin SOT-23 Package
2 Applications
- Battery Powered Applications
- 1 to 3 Cell Alkaline, Ni Cd or Ni MH
- 1 Cell Li-Ion or Li-Primary
- Solar or Fuel Cell Powered Applications
- Consumer and Portable Medical Products
- Personal Care Products
- White or Status LEDs
- Smartphones
3 Description
The TLV61220 device provides a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, Ni Cd or Ni MH, or onecell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is packaged in a 6-pin thin SOT-23 package (DBV). spacer
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOT (6)
2.90 mm x 1.60 mm
(1) For all available packages, see the orderable addendum at the end of the datasheet.
4 Typical Application Schematic
L 1
4.7:H
SW VOUT
V IN
0.7V to V OUT
C 1
10:F
VBAT EN...
