TMUX136 Datasheet | Texas Instruments

Features - VCC range 2.3 V to 4.8 V - High performance switch characteristics: - Bandwidth (- 3 d B): 6.1 GHz - RON (typical): 5.7 Ω - CON (typical): 1.6 p F - Current consumption: 30 µA (typical) - Special features : - IOFF protection prevents current leakage in Powered-Down state - 1.8-V patible control inputs (SEL, EN) - Flow-through pinout simplifies PCB layout - patible with high-speed I3C signals - ESD performance: - 5-k V Human Body Model (A114B, Class II) - 1-k V Charged-Device Model (C101) - pact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch) 2 Applications - I3C (Sense Wire) - Mobile industry processor interface (MIPI) - Servers - Handset: smartphone - Notebook PC - Tablet: multimedia - Electronic point-of-sale - Field instrumentation - Portable monitor A1 A2 B1 B2 Digital Control Simplified Schematic 3 Description The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide VCC range of 2.3 V to 4.8 V and supports a poweroff protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the VCC pin. The select pins of TMUX136 are patible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flowthrough pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low oncapacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital munication protocol standards, including high-speed standards such as I3C. The TMUX136 es in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited. Package...