TPS2551
TPS2551 is Adjustable Current-Limited Power-Distribution Switches manufactured by Texas Instruments.
- Part of the TPS2550 comparator family.
- Part of the TPS2550 comparator family.
Features
- Adjustable current-limit, 100 m A- 1100 m A
- Fast overcurrent response
- 2 μS typical
- 94-mΩ high-side MOSFET (DBV package)
- Reverse input-output voltage protection
- Operating range: 2.5 V to 6.5 V
- Deglitched fault report
- 1-μA maximum standby supply current
- Junction temperature range:
- 40°C to 125°C
- Built-in soft-start
- 15 k V ESD protection (with external capacitance)
- UL listed
- file No. E169910
- Current-limit resistor calculator
- SLVC163
2 Applications
- USB Ports/Hubs
- Cell phones
- Laptops
- Heavy Capacitive Loads
- Reverse-Voltage Protection
3 Description
The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 m A and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.
The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection parator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
Package Information
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
TPS255x
SOT-23 (6) WSON (6)
2.90 mm × 1.60 mm 2.00 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at the end of the data sheet.
5 V USB INPUT
RFAULT 100 k W
0.1 m...
