900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

TPS40003 Datasheet Preview

TPS40003 Datasheet

Synchronous Buck Controller

No Preview Available !

TPS40000, TPS40001
TPS40002, TPS40003
TPS40004, TPS40005
SLUS507D − JANUARY 2002 − REVISED NOVEMBER 2005
LOWĆINPUT VOLTAGEĆMODE
SYNCHRONOUS BUCK CONTROLLER
FEATURES
D Operating Input Voltage 2.25 V to 5.5 V
D Output Voltage as Low as 0.7 V
D 1% Internal 0.7 V Reference
D Predictive Gate Drivet N-Channel MOSFET
Drivers for Higher Efficiency
D Externally Adjustable Soft-Start and
Overcurrent Limit
D Source-Only Current or Source/Sink Current
D Versions for Starting Into VOUT Pre-Bias
D 10-Lead MSOP PowerPadt Package for
Higher Performance
D Thermal Shutdown
D Internal Boostrap Diode
D Fixed-Frequency, Voltage-Mode Control
− TPS40000/1/4 300-kHz
− TPS40002/3/5 600-kHz
SIMPLIFIED APPLICATION DIAGRAM
APPLICATIONS
D Networking Equipment
D Telecom Equipment
D Base Stations
D Servers
D DSP Power
D Power Modules
DESCRIPTION
The TPS4000x are controllers for low-voltage,
non-isolated synchronous buck regulators. These
controllers drive an N-channel MOSFET for the
primary buck switch, and an N-channel MOSFET
for the synchronous rectifier switch, thereby
achieving very high-efficiency power conversion. In
addition, the device controls the delays from main
switch off to rectifier turn-on and from rectifier
turn-off to main switch turn-on in such a way as to
minimize diode losses (both conduction and
recovery) in the synchronous rectifier with TI’s
proprietary Predictive Gate Drivet technology. The
reduction in these losses is significant and increases
efficiency. For a given converter power level, smaller
FETs can be used, or heat sinking can be reduced
or even eliminated.
VIN
TPS40000
1 ILIM
BOOT 10
2 FB
HDRV 9
3 COMP
4 SS/SD
SW 8
VDD 7
VOUT
5 GND
LDRV 6
PowerPADt and Predictive Gate Drivet are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
UDG−01141
Copyright 2005, Texas Instruments Incorporated
1




etcTI

TPS40003 Datasheet Preview

TPS40003 Datasheet

Synchronous Buck Controller

No Preview Available !

TPS40000, TPS40001
TPS40002, TPS40003
TPS40004, TPS40005
SLUS507D − JANUARY 2002 − REVISED NOVEMBER 2005
DESCRIPTION (continued)
The current-limit threshold is adjustable with a single resistor connected to the device. The TPS4000x
controllers implement a closed-loop soft start function. Startup ramp time is set by a single external capacitor
connected to the SS/SD pin. The SS/SD pin is also used for shutdown.
ORDERING INFORMATION
PACKAGED DEVICES MSOP(2) (DGQ)
APPLICATION
TA
FREQUENCY
SOURCE
ONLY
SOURCE/SINK SOURCE/SINK(3)
WITH PREBIAS(3)
−40°C to 85°C
300 kHz
600 kHz
TPS40000DGQ
TPS40002DGQ
TPS40001DGQ
TPS40003DGQ
TPS40004DGQ
TPS40005DGQ
(2) The DGQ package is available taped and reeled. Add R suffix to device type (e.g.
TPS40000DGQR) to order quantities of 2,500 devices per reel and 80 units per tube.
(3) See Application Information section, p. 8.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
TPS4000x
UNIT
BOOT
COMP, FB, ILIM, SS/SD
VSW + 6.5
−0.3 to 6
Input voltage range, VIN
SW
SWT (SW transient < 50 ns)
VDD
−0.7 to 10.5
−2.5
6
V
Operating junction temperature range, TJ
−40 to 150
Storage temperature, Tstg
−55 to 150
°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
260
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions”
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
ILIM
FB
COMP
SS/SD
GND
DGQ PACKAGE(4).(5)
(TOP VIEW)
1 10
29
38
47
56
BOOT
HDRV
SW
VDD
LDRV
ACTUAL SIZE
3,05mm x 4,98mm
(4) See technical brief SLMA002 for PCB guidelines for PowerPAD packages.
(5) PowerPADt heat slug can be connected to GND (pin 5).
2 www.ti.com


Part Number TPS40003
Description Synchronous Buck Controller
Maker etcTI
PDF Download

TPS40003 Datasheet PDF






Similar Datasheet

1 TPS40000 Synchronous Buck Controller
etcTI
2 TPS40001 Synchronous Buck Controller
etcTI
3 TPS40002 Synchronous Buck Controller
etcTI
4 TPS40003 Synchronous Buck Controller
etcTI
5 TPS40004 Synchronous Buck Controller
etcTI
6 TPS40005 Synchronous Buck Controller
etcTI
7 TPS40007 Synchronous Buck Controller
etcTI
8 TPS40009 Synchronous Buck Controller
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy