TPS53355 Datasheet | Texas Instruments

Features 2 Applications - Alternative product available: LMZ31530 14.5-V, 30-A step-down power module in 15 × 16 × 5.8mm QFN package - 96% maximum efficiency - Conversion input voltage range: 1.5 V to 15 V - VDD input voltage range: 4.5 V to 25 V - Output voltage range: 0.6 V to 5.5 V - 5-V LDO output - Supports single rail input - Integrated power MOSFETs with 30 A of continuous output current - Auto-skip Eco-mode™ for light-load efficiency - < 10-μA shutdown current - D-CAP™ mode with fast transient response - Selectable switching frequency from 250 k Hz to 1 MHz with external resistor - Selectable auto-skip or PWM-only operation - Built-in 1% 0.6-V reference - 0.7-ms, 1.4-ms, 2.8-ms, and 5.6-ms selectable internal voltage servo soft start - Integrated boost switch - Precharged start-up capability - Adjustable overcurrent limit with thermal pensation - Overvoltage, undervoltage, UVLO and overtemperature protection - Supports all ceramic output capacitors - Open-drain power-good indication - Incorporates Nex FET™ power block technology - 22-pin QFN package With Power PAD™ - For SWIFT™ power products documentation, see http://.ti./swift - Green (Ro HS patible) is optional - Create a custom design using the TPS53355 with the WEBENCH® Power Designer VVDD - Enterprise servers and storage - Wired networking switches and routers - ASIC, So C, FPGA, DSP core, and I/O voltage 3 Description The TPS53355 is a D-CAP™ mode, 30-A synchronous switcher with integrated MOSFETs. It is designed for ease of use, low external ponent count, and space-conscious power systems. This device features 5-mΩ/2-mΩ integrated MOSFETs, accurate 1% 0.6-V reference, and integrated boost switch. A sample of petitive features include: 1.5-V to 15-V wide conversion input voltage range, very low external ponent count, DCAP™ mode control for super fast transient, auto-skip mode operation, internal soft-start control, selectable frequency, and no need for pensation. The conversion input voltage ranges...