Datasheet4U Logo Datasheet4U.com

TPS53681 - Step-Down Multiphase Controller

General Description

The TPS53681 is a multiphase step-down controller with dual channels, built-in non-volatile memory (NVM), and PMBus™ interface, and is fully compatible with TI NexFET ™power stage.

Key Features

  • 1 Conversion Input Voltage Range: 4.5 V to 17 V.
  • 8-Bit DAC with Selectable 5 mV or 10 mV Resolution and Output Ranges from 0.25 V to 1.52 V or 0.5 to 2.8125 V for Dual Channels.
  • Phase Configurations.
  • Maximum (6-Phase + 2-Phase) or (5-Phase + 3-Phase).
  • Minimum (1-Phase + 1-Phase).
  • Driverless Configuration for Efficient HighFrequency Switching.
  • Dynamic Output Voltage Transitions with Programmable Slew Rates via PMBus Interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS534 Thermopile Detector PerkinElmer Optoelectronics
TPS535 Thermopile Detector PerkinElmer Optoelectronics
TPS54540D High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS54540DDAR High Efficiency Synchronous Step-down DCDCConverter tokmas
TPS-1 Single Chip Interface Solution Renesas

Other Datasheets by Texas Instruments

Part Number Description
TPS53689T Dual-channel Multiphase Controllers
TPS53624 Step-Down Controller
TPS53625 Step-Down Controller
TPS53632 Step-Down Driverless Controller
TPS53632G Half-Bridge PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS53681 SLUSCT1B – JUNE 2017 – REVISED JANUARY 2019 TPS53681 Dual-Channel (6-Phase + 2-Phase) or (5-Phase + 3-Phase) D-CAP+™ Step-Down Multiphase Controller with NVM and PMBus™ 1 Features •1 Conversion Input Voltage Range: 4.5 V to 17 V • 8-Bit DAC with Selectable 5 mV or 10 mV Resolution and Output Ranges from 0.25 V to 1.52 V or 0.5 to 2.