TPS60124 Datasheet | Texas Instruments

ures D High Average Efficiency Over Input Voltage Range Because of Special Switching Topology D Minimum 200-m A Output Current From an Input Voltage Range of 1.8-V to 3.6-V D Regulated 3.3-V or 3-V ±4% Output Voltage D No Inductors Required, Low EMI D Only Four External ponents Required D 55-µA Quiescent Supply Current D 0.05-µA Shutdown Current D Load Disconnected in Shutdown D Integrated Low Battery and Power Good Detectors D Evaluation Module Available (TPS60120EVM-142) - description The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, Ni Cd, or Ni MH batteries). They can deliver an output current of at least 200 m A (100 m A for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a plete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current. The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery parator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1 µA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin Power PADt package (PWP). applications D Applications Powered by Two Battery Cells D Portable Instruments D Battery-Powered Microprocessor Systems D Miniature Equipment D Backup-Battery Boost Converters D PDAs, Organizers, Laptops D MP-3 Portable Audio Players D Handheld Instrumentation D Medical Instruments (e.g., Glucose Meters) D Cordless...