Datasheet4U Logo Datasheet4U.com

KHX1600C9D3K2G - (KHX1600C9D3K2G / KHX1600C9D3K8G) DDR3-1600 CL9 240-Pin DIMM Kit

General Description

Kingston's KHX1600C9D3K2/8G is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory modules, based on sixteen 256M x 8-bit FBGA components per module.

Total kit capacity is 8GB.

Key Features

  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7 (DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4.

📥 Download Datasheet

Datasheet Details

Part number KHX1600C9D3K2G
Manufacturer kingston
File Size 265.68 KB
Description (KHX1600C9D3K2G / KHX1600C9D3K8G) DDR3-1600 CL9 240-Pin DIMM Kit
Datasheet download datasheet KHX1600C9D3K2G Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Memory Module Specifications KHX1600C9D3K2/8G 8GB (4GB 512M x 64-Bit x 2 pcs.) DDR3-1600 CL9 240-Pin DIMM Kit SPECIFICATIONS CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) Maximum Operating Power UL Rating Operating Temperature Storage Temperature 9 cycles 49.5ns (min.) 160ns (min.) 36ns (min.) 2.400 W* (per module) 94 V - 0 0o C to 85o C -55o C to +100o C *Power will vary depending on the SDRAM used. DESCRIPTION Kingston's KHX1600C9D3K2/8G is a kit of two 512M x 64-bit (4GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory modules, based on sixteen 256M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-1600 at a low latency timing of 9-9-9-27 at 1.65V.